Vanden Plas (X300) L6-4.0L (AJ16) (1996)
3.
Remove and discard the existing lower mounting nut (Illustration 1) from the lower mounting bolt of each shock absorber.
4.
Install a new mounting nut (part no. JZN 100013) and torque to 51.6 lb. ft. (70 Nm).
5.
Reinstall the stabilizer bar link using a new nut (part no. JZN 100013) and torque to 70 lb. ft. (95 Nm).
6.
Repeat steps 1-5 on the opposite side of the vehicle.
PARTS INFORMATION:
DESCRIPTION
PART NUMBER
QTY/VEH
Cup washer
CBC 5431
2
Nut, self-locking - upper shock absorber mounting
JZN 100013
2
Nut, self-locking - lower shock absorber mounting
NY 607041/J
2
Nut, self-locking - stabilizer bar lower mounting
NY 607041/J
2
WARRANTY INFORMATION: