Vanden Plas (X300) L6-4.0L (AJ16) (1996)
Fluid - A/T: Service and Repair
Transmission Fluid Filter, Renew
TRANSMISSION FLUID FILTER, RENEW
-
Raise the hood and fit a fender cover.
-
Raise the vehicle on a ramp.
-
Drain the transmission lubrication system.
-
Remove the fluid pan.
-
Release and remove the fluid filter securing screws; displace and remove the fluid filter.
-
Remove and discard the filter '0' ring.
-
Clean the new filter and mating faces.
-
Fit the '0' ring to the new filter; fit and seat the filter assembly to the valve body.
-
Fit and torque tighten the filter securing screws.
-
Refit the fluid pan.
-
Lower the vehicle on the ramp.
-
Refill the transmission unit with fluid.
-
Remove the fender cover and lower the hood.