Vanden Plas (X308) V8-4.0L (AJ27) (2000)
Grille: Service and Repair
Radiator Grille
Radiator Grille (76.55.03)
Removal
1. Slacken and remove the two screws securing top of grill to surround.
2. Lift grill to withdraw retaining lugs from slots and remove grill from vehicle.
3. Remove and discard the two nylon screw inserts from top of surround (adapters for supercharged models).
4. Repeat above steps to remove grill on opposite side.
Installation
1. Fit new screw inserts/adapters to top of grill surround.
2. Fit grill lower lugs into surround slots.
3. Fit and tighten the two screws securing top of grill to surround.
4. Repeat above steps to install grill on opposite side.