Vanden Plas (X308) V8-4.0L (AJ27) (2000)
Remove anti-rattle spring.
Remove dust covers.
Remove guide pins.
Remove housing from carrier. Tie caliper housing aside.
6. CAUTION: Always install new brake pads, irrespective of the condition of the original pads, when renewing a brake disc.
NOTE: The inner brake pad is fitted with a clip which secures the pad into the caliper piston.
Remove brake pads from caliper housing.
Discard brake pads.
7. Remove caliper carrier from hub carrier.
Remove bolts.
Remove carrier.