Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-384001.png)
Catalytic Converter Mounting Gasket: Service and Repair
Left-Hand
Removal
1. Open the engine compartment and fit paintwork protection sheets.
2. Remove the front muffler; Refer to 'Exhaust System, Muffler.' See: Muffler/Service and Repair
3. Remove the center trim panel from the engine compartment.
Remove the left hand side enclosure panel.
Remove the center trim panel.
4. Reposition the expansion tank from the mounting.
Disconnect the coolant level sensor connector.
Remove the nuts which secures the tank.
