Vanden Plas (X308) V8-4.0L (AJ27) (2000)
Heater Core: Service and Repair
Heater Matrix
Removal
1. Drain radiator coolant only.
2. Remove instrument panel for access.
3. Remove driver footwell duct.
-
Remove screw.
-
Remove duct.
4. Disconnect cool air bypass servo motor connector and heater matrix pipes.
1. Disconnect connector.
NOTE: Position suitable cloth to absorb coolant leakage before disconnecting pipes.
2. Remove screws and retaining brackets.
3. Remove screws and matrix clamps.
NOTE: Discard O-ring seals from pipes; fit suitable blanking plugs.
-
Detach pipes from matrix.