Vanden Plas (X308) V8-4.0L (AJ27) (2000)
/v8-4.0l_(aj27)/Page-68002.png)
4. Disconnect the TCM harness multiplug EM007.
5. Lift the TCM from its housing.
Installation
1. NOTE: A replacement TCM may only be obtained from an authorized Jaguar dealer and MUST be ordered against the VIN.
Fitting a new TCM is the reverse of the removal procedure.
At this point ensure that the ECM is correctly located and pushed fully rearward against the housing.
2. Connect the battery and fit the battery cover..
Reset the radio and the clock.
