Vanden Plas (X308) V8-4.0L (AJ27) (2000)
1. Position air bag module and connect harness multiplug.
2. Fit multiplug onto retaining clip.
3. Carefully install airbag module in steering wheel.
4. Turn steering wheel 90 degrees to right and partially tighten module RH securing bolt.
5. Turn steering wheel 90 degrees to left and partially tighten module LH securing bolt.
6. Repeat steps 3 and 4 to fully tighten securing bolts and return steering wheel to central position.
7. Fit ground cable to battery terminal.