Vanden Plas (X308) V8-4.0L (AJ27) (2000)
Power Window Switch: Procedures
Front Door Glass Lift Switch Veneer Panel
Removal
1. Remove door casing veneer panel. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair
2. Remove door casing. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair
3. Remove door armrest and remove switch pack assembly from armrest. See: Body and Frame/Interior Moulding / Trim/Arm Rest/Service and
Repair
4. Slacken and remove three screws securing door glass lift switch veneer panel to switch pack.
5. Remove veneer panel from switch assembly.
Installation
1. Position veneer panel over switch assembly and fit and tighten securing screws.
2. Position switch pack assembly on armrest and fit and tighten securing screws.
3. Fit armrest to door casing. See: Body and Frame/Interior Moulding / Trim/Arm Rest/Service and Repair
Front Door Glass Lift Switch pack
FRONT DOOR GLASS LIFT SWITCH PACK
Removal
1. Remove casing/armrest assembly from door. See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and Repair
2. Slacken and remove armrest front securing screw.