Vanden Plas (X308) V8-4.0L (AJ27) (2000)
Torque Converter: Service and Repair
Torque Converter
Special Service tools
307-139 Lifting Handle
Removal
1. Remove the transmission unit from the vehicle.
2. Remove the torque converter from the transmission unit.
Install lifting handles 307-139.
3. Remove lifting handles 307-139 from the torque converter.
4. Clean the torque converter and mating faces.
Installation
1. CAUTION: Use extreme care NOT to damage the oil seal with the converter spigot.
CAUTION: Ensure that the converter is fully located.
Install the torque converter.
Install lifting handles 307-139.