Vanden Plas (X308) V8-4.0L SC (AJ27) (2001)
2. Remove veneer panel from casing.
1. Using a thin plastic lever, carefully ease rear of veneer panel inwards to release the two rear securing tangs.
2. Slide veneer panel rearwards to release front retainers.
Installation
1. Position veneer panel on casing and slide forward to engage front retainers.
2. Using a soft pad or cloth, press rear of panel firmly to seat the securing tangs.
3. Fit door handle escutcheon.
Door Casing
FRONT DOOR CASING
Removal
1. Remove interior door handle escutcheon.
-
Remove cover from door handle escutcheon securing screw and slacken and remove screw.
-
Pull door handle inwards and exercising care to avoid damaging tweeter remove escutcheon from casing.
2. Remove door casing veneer panel.