Vanden Plas (X308) V8-4.0L SC (AJ27) (2001)
12. Slacken and remove puddle lamp securing screws and remove lamp assembly from casing.
13. Remove pocket from door casing.
1. Release puddle lamp harness from clips at base of door pocket.
2. Slacken and remove the two screws securing bottom of pocket to casing.
3. Remove two spring clips securing top of pocket to casing.
14. Lift pocket from casing.
15. Slacken and remove door speaker securing screws and remove speaker from casing.
Installation
1. Fit and fully seat casing securing clips.
2. Position speaker grill in casing align speaker and fit and tighten securing screws.