Vanden Plas (X308) V8-4.0L SC (AJ27) (2001)
Front Subframe Mount: Service and Repair
Front Axle Crossmember Front Bushing
Front Axle Crossmember Front Bushing (60.35.24)
Special Service Tools
Removal
CAUTION: Replacement of nuts and bolts: Various thread-locking devices are used on nuts and bolts throughout the vehicle. These devices
restrict the number of times a nut or bolt can be used.
1. Position vehicle on a four-post lift.
2. Remove ignition key and engage steering column lock.
3. Open hood to service position, and fit covers to fenders.
4. Remove battery cover and disconnect ground cable from battery terminal.
5. Remove the left engine cover (normally aspirated vehicles only).
-
Release pegs.
-
Remove cover.
6. Remove the right engine cover (normally aspirated vehicles only).
-
Release pegs.
-
Remove cover.