Vanden Plas (X308) V8-4.0L SC (AJ27) (2001)
/v8-4.0l_sc_(aj27)/Page-1009002.png)
5. Slacken and remove the cupholder trim panel securing screws.
Installation
1. Fit trim panel assembly to cupholder mechanism.
2. Fit and tighten the trim panel securing screws.
3. Fit and fully seat cupholder mechanism, ensuring tangs are fully engaged
4. Fit and tighten lid inner securing screws.
5. Fit cupholder latch and tighten securing screw.
6. Fit glovebox lid. See: Glove Compartment/Service and Repair
