Service and Repair for Front Seats of Vanden Plas X308 V8-40L SC (AJ27) - Page 4922
REAR SEAT SQUAB
Removal
1. Heated seat only. Remove battery cover and disconnect ground cable from battery terminal.
2. Remove rear seat cushion. See: Seat Cushion/Service and Repair
3. Remove rear head restraints.
4. Slacken and remove outer seat belt lower anchor securing bolts.
5. Slacken and remove bolt securing centre seat belt lower anchor plate and buckle cable to seat pan.
6. Remove seat belt escutcheon.
1. Using a flat-bladed screwdriver in the two rectangular apertures, carefully withdraw escutcheon from squab top roll.