Front Brake Caliper Service and Repair for Vanden Plas X308 V8-40L SC (AJ27) 2001
8. Release brake hose from caliper.
^
Remove union bolt.
^
Remove and discard sealing washers.
^
Install plugs into caliper and hose.
9. Remove brake pads from caliper.
1. Withdraw pins from caliper.
2. Remove anti-rattle spring.
3. Remove brake pads.
10. CAUTION: Only remove the bolts securing the caliper anchor bracket to the hub carrier. Refer to caution above for more information.
Remove caliper from hub carrier.
^
Remove bolts.
11. Remove brake dust and clean mating surfaces. See Warning above.
Installation