Vanden Plas (X308) V8-4.0L SC (AJ27) (2001)
/v8-4.0l_sc_(aj27)/Page-579006.png)
13. CAUTION: Retracting the caliper piston may cause the fluid reservoir to over-flow. Remove brake fluid spillage immediately from paint work
with clean water.
CAUTION: Note condition of pins and replace if necessary.
Install brake pads to caliper.
^
Slowly retract caliper pistons.
1. Install pads.
2. Position anti-rattle spring.
3. Install pins - make sure pin collets are fully engaged into caliper.
14. Fit wheel.
