Vanden Plas (X308) V8-4.0L SC (AJ27) (2001)
10. Remove brake pads from caliper.
1. Remove "R" clips.
2. Withdraw pins from caliper.
3. Remove anti-rattle spring.
4. Remove brake pads.
11. CAUTION: Only remove the bolts securing the caliper anchor bracket to the vertical link. Refer to caution above for more information.
Remove caliper from vertical link.
^
Remove bolts.
12. Remove brake dust and clean mating surfaces. See Warning above.
Installation
1. Install caliper to vertical link.
^
Install and tighten bolts to 140 Nm.