Vanden Plas (X308) V8-4.0L SC (AJ27) (2001)
Exhaust Manifold Gasket: Service and Repair
Gasket - Downpipe Catalytic Converter to Manifold - Right
Removal
1. Open the engine compartment and fit paintwork protection sheets.
2. CAUTION: Note the position of the upstream and downstream (where fitted) oxygen sensor multiplugs for reassembly.
Disconnect the oxygen sensor multiplugs.
-
Displace the multiplugs from the engine mounting bracket.
-
Disconnect the plug(s) from the oxygen sensor(s)
3. Remove the four nuts which secure the downpipe catalytic converter to the exhaust manifold.
4. Raise the vehicle on a ramp.