Left Catalytic Converter to Manifold Gasket Replacement for Vanden Plas X308 - Page 1448
8. Remove the downpipe catalytic converter.
-
Remove the bolts which secure the downpipe lower mounting bracket.
-
Remove the downpipe assembly.
9. Remove gasket from the manifold flange.
-
Clean and inspect the manifold joint faces.
-
Clean and inspect the threads on the downpipe studs.
Installation
1. Fit a new gasket to the manifold mating flange on the downpipe.
2. Fit the downpipe catalytic converter.
1. Fit the downpipe assembly to the manifold.
-
Fit, but do not fully tighten, the mounting bracket securing bolts. (Leave loose until the nuts securing the downpipe to the exhaust manifold
are fitted.)
3. Lower the ramp.