Vanden Plas (X308) V8-4.0L SC (AJ27) (2001)
12. On the underside of the vehicle, fit the drain pipe to the securing clip.
13. On the underside of the vehicle, reconnect the fuel feed and return pipes.
-
Remove the plugs from the tank and fuel feed and return pipes.
1. Push the fuel feed pipe into the quick-fit tank connector. Ensure the pipe is fully home.
2. Push the fuel return pipe into the quick-fit tank connector. Ensure the pipe is fully home.
14. Fit the trunk side liner, lefthand.
15. Fit the trunk side liner, righthand.
16. Fit the trunk seal retainer.
17. Fit the rear lamp assembly interior trim finisher.
18. Fit the trunk front liner.
19. Fit the trunk floor carpet.
20. Ensure that the fuel feed pipes in the engine compartment are reconnected after tank draining.
21. Re-fit the battery.
22. Carry out a leak test of the evaporative emissions system.