Vanden Plas (X308) V8-4.0L SC (AJ27) (2001)
Stabilizer Bushing: Service and Repair
Mounting Rubber, Stabilizer Bar
Removal
1. Raise front of vehicle and support on stands.
2. Remove generator front cooling duct.
^
Remove bolt.
^
Move duct rearwards to release tang from under tray.
^
Release front duct from rear vertical duct.
3. Remove scrivets or screws securing under tray to bumper cover. Discard scrivets.
4. Remove and discard tie strap securing under tray to crossbeam front brace.