Vanden Plas Front Suspension Spring Replacement (X308) 2001 - Service and Repair
4. Rotate stem of Special Tool 204-111 to position dowel across slot.
5. WARNING: WHEN TURNING TOOL ADJUSTER, ENSURE THAT TOOL STEM DOES NOT ROTATE AND DISTURBED POSITION
OF DOWEL IN SUSPENSION TURRET.
Rotate adjuster of Special Tool to tension spring.
6. Remove spring pan to lower wishbone securing bolts.
7. WARNING: WHEN TURNING TOOL ADJUSTER, ENSURE THAT TOOL STEM DOES NOT ROTATE AND DISTURBED POSITION
OF DOWEL IN SUSPENSION TURRET.
Rotate adjuster of Special Tool to release tension from spring.
8. Remove spring assembly and Special Tool from suspension turret.
9. Remove Special Tool from spring assembly.
Installation