Vanden Plas (X308) V8-4.0L SC (AJ27) (2001)
/v8-4.0l_sc_(aj27)/Page-761014.png)
21. Install pivot pin nut.
^
Align marker on pivot pin flange with mark made on wishbone.
^
Install nut on pivot pin and ensuring pin position is not disturbed, tighten nut to 88 - 118 Nm.
22. Release brake caliper from suspension tie.
23. Install brake caliper on carrier.
1. Position caliper assembly on carrier.
2. Install guide pins and tighten to 25 - 30 Nm.
3. Install dust caps.
4. Install brake caliper spring clip.
24. Connect wheel speed sensor harness to sensor.
