Vanden Plas (X308) V8-4.0L SC (AJ27) (2001)
7. Install hub in outer bearing and carrier.
8. Install inner bearing in hub carrier.
1. Install bearing spacer to hub.
2. Install a 3.47 mm (maximum thickness) shim on hub.
3. Install inner bearing in hub carrier.
9. CAUTION:
Do not allow press load to be directed on to hub studs.
Using a hydraulic press, install ABS-sensor rotor to hub.
^
Place block of wood on press-bed.
1. Position hub carrier on block of wood.
2. Position ABS-rotor sensor to hub.
^
Align assembly to press-ram, and operate press to install ABS-sensor rotor to hub.