jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Procedures|Page 4856 > < Procedures|Page 4854
Page 1
background image

Rear Door Window Regulator: Removal and Replacement

Rear Door Window Regulator

Rear Door Window Regulator (76.31.46)

Removal

1. Remove the door trim panel.
2. Remove the rear speaker.

3. CAUTION:  Do not touch the adhesive surface as rebonding will be impaired

Peel back the weathershield.

4. Lower the door window glass until the pin is visible in the access hole.

5. Detach the window glass from the regulator.

1. Remove the pin.
2. Remove the sleeve.
3. Detach the window glass from the regulator.

6. Secure window glass in the fully raised position.

-

Apply suitable protective tape to the top of the window glass.

Procedures|Page 4856 > < Procedures|Page 4854