X-Type (X400) V6-2.5L (2005)
/v6-2.5l/Page-1341004.png)
21. NOTE: Headliner shown removed for clarity.
Using a suitable adhesive tape, protect both front corners of the headliner.
22. NOTE: Headliner shown removed for clarity.
Using a suitable adhesive tape, protect both rear corners of the headliner.
23. CAUTION:
-
Make sure the headliner is not creased or folded where it is not protected by adhesive tape. Failure to follow this instruction may
result in damage to the component.
-
Make sure the headliner is fully supported during removal. Failure to follow this instruction may result in damage to the component.
With the aid of an assistant, remove the headliner.
Installation
1. To install, reverse the removal procedure.
2. NOTE: The liftgate weatherstrip must be replaced once removed.
Install a new liftgate opening weatherstrip.
