jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Body - Rust Beneath Trunk Lid Trim Panel|Page 5225 > < Body - Rust Beneath Trunk Lid Trim Panel|Page 5223
Page 6
background image

33.

Close the trunk lid.

Disclaimer

Technical Service Bulletin # XT501-039

Date: 061023

Body - Rust Beneath Trunk Lid Trim Panel

NUMBER 
XT501-039

DATE
23 Oct 2006

MODEL
X-TYPE

SECTION:
501-08 - EXTERIOR TRIM AND ORNAMENTATION

Rust Bleeding from Underside of Bright Finish Trim Panel

AFFECTED VEHICLE RANGE:
X-TYPE

VIN:
C00001 to E90690

Model Year:
2002 to 2006

CONDITION SUMMARY:

RUST BLEEDING FROM UNDERSIDE OF TRUNK LID BRIGHT FINISH TRIM PANEL

Situation: 
Rust can be seen beneath the trunk lid finish trim panel. The rust is typically seen at the top corner of the license plate mounting area where the bright
finish trim panel meets the body.

A sharp corner of the bright finish trim panel can cut into the outer surface of the body paint at assembly. Over time, water can penetrate the surface paint
and lead to the corrosion. Action: Should a customer express this concern, refer to the Repair Procedure detailed in this bulletin to complete the service
fix.

PARTS:

C25 45279.....Foam pad (set of 2 as required)

Qty 1 

C25 45280.....Plastic washer (set of 2 as required)

Qty 1

WARRANTY:

NOTE:

This operation does not require a repainting of the whole of the trunk lid. Repair times and materials are to be claimed for repairing, cleaning and
painting the affected area, as outlined in the Body and Paint Repair Manual.

NOTE:

Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always
refer to DDW to obtain the latest repair time.

Body - Rust Beneath Trunk Lid Trim Panel|Page 5225 > < Body - Rust Beneath Trunk Lid Trim Panel|Page 5223