X-Type (X400) V6-2.5L (2005)
Electronic Brake Control Module: All Technical Service Bulletins
ABS/TCS - DSC Lamp ON/DTC U1900 After Start Up
NUMBER
MODEL
DATE
ISSUE '5' CHANGES ARE HIGHLIGHTED WITH GRAY BACKGROUND
SECTION: 206
Dynamic Stability Control Lamp Illuminated After Cranking - Repair Procedure
AFFECTED VEHICLE RANGE
CONDITION SUMMARY:
DYNAMIC STABILITY CONTROL (DSC) LAMP ILLUMINATED AFTER CRANKING
Situation:
After cranking, the DSC lamp illuminates and remains 'ON' for the remainder of the ignition cycle, with the possibility of Diagnostic Trouble Code
(DTC) U1900 stored. A missing Controller Area Network (CAN) message may be the cause.
NOTE:
The Repair Procedure is for the replacement electronic portion of the Dynamic Stability Control Module (DSCM) only and should only be performed if
all conditions have been met. The presence of DTC U1900 without the DSC lamp remaining 'ON' does not warrant a replacement DSCM.
Action:
Should a customer express concern and all conditions have been confirmed, refer to the Repair Procedure outlined below to install a new Dynamic
Stability Control Module (DSCM).
PARTS
TOOLS