X-Type (X400) V6-2.5L (2005)
Oil Pump: Service and Repair
Oil Pump
Removal
1. Remove the timing chains.
2. Remove and discard the engine oil filter.
3. Remove the oil pump tube.
4. Remove the oil pump.
^
Remove and discard the O-ring seal.
^
Inspect the oil pump for damage and wear.
Installation
1. CAUTION: Install the oil pump flush to the cylinder block for correct sealing.
CAUTION: Rotate the inner rotor of the oil pump to align with the flats on the crankshaft before installation.
Install the oil pump.
^
Tighten to 10 Nm.
2. Install the oil pump tube.
^
Install a new O-ring seal.
^
Tighten to 10 Nm.
3. Tighten to 5 Nm + 45°.