X-Type (X400) V6-2.5L (2005)
1. Install the evaporative emission canister.
-
Tighten to 5 Nm.
NOTE: Non federal market vehicles only.
2. Install the evaporative emission canister rear retaining nut.
-
Tighten to 5 Nm.
NOTE: Non federal market vehicles only.
3. Install the fuel tank.
NOTE: Non federal market vehicles only.
4. Install the evaporative emission canister.
-
Tighten to 5 Nm.
NOTE: Federal market vehicles only.
5. Using the special tool, install the fuel tank.
-
Attach the fuel filler pipe hose to the fuel tank.
NOTE:
-
Federal market vehicles only.