X-Type (X400) V6-2.5L (2005)
Fuel Level Sensor: Service and Repair
LH
Fuel Level Sender
Removal
WARNING:
-
Do not smoke or carry lighted tobacco or an open flame of any type when working on or near any fuel related components. Highly flammable
vapors are always present and may ignite. Failure to follow these instructions may result in personal injury.
-
Do not carry or operate cellular phones when working on or near any fuel related components. Highly flammable vapors are always present
and may ignite. Failure to follow these instructions may result in personal injury.
-
This procedure involves fuel handling. Be prepared for fuel spillage at all times and always observe fuel handling precautions. Failure to
follow these instructions may result in personal injury.
1. Remove the transfer pump.
2. Disconnect the fuel level sender electrical connector.
NOTE: Non federal market vehicles only.
3. Remove the fuel level sender.
NOTE: Non federal market vehicles only.
4. Remove the tie straps.
NOTE:
-
Federal market vehicles only.
-
Note the position of the tie straps securing the harness to the fuel pipes.
5. Remove the fuel level sender and harness.
NOTE: Federal market vehicles only.