X-Type (X400) V6-2.5L (2005)
/v6-2.5l/Page-152003.png)
1. To install, reverse the removal procedure.
-
Tighten to 19 Nm.
NOTE: Prior to installing the KS, clean the engine block and KS mating surfaces with metal surface cleaner (WSWM5B392-A).
2. Install a new seal.
-
Tighten to 25 Nm.
3. Install a new seal.
-
Tighten to 10 Nm.
4. Tighten in the sequence shown.
-
Tighten to 10 Nm.
