X-Type (X400) V6-2.5L (2005)
1.
Perform the following to one side of the vehicle:
NOTE:
Global Technical Reference (GTR) lookup sequence is as follows:
GTR Home> NAS > Service Information/ X400 - X-TYPE/2005 > Workshop Manuals > Bookmark "Chassis/Suspension/204-02: Rear
Suspension" Removal and Installation link "Wheel Knuckle Front Bushing (64.15.28)"
^
Refer to GTR section 204-02, operation 64.15.28 and remove the front bushing from the rear suspension knuckle.
NOTE:
The modified bushing is voided. The voids of the modified bushing must be installed with the correct orientation as illustrated in Figure 1.
^
Refer to GIR section 204-02, operation 64.15.28 and install a modified front bushing to the rear suspension knuckle, ensuring the voids in
the bushing are correctly oriented. (Figure 1)
2.
Repeat step 1 to the opposite side of the vehicle.*
Disclaimer