X-Type (X400) V6-2.5L (2005)
Shift Solenoid: Service and Repair
Shift Solenoids (SS)
Removal
1. Remove the main control valve body.See: Automatic Transmission/Transaxle/Valve Body
2. Disconnect the electrical connector.
3. Remove the shift solenoid.
Installation
1. NOTE: Lubricate the shift solenoid O-ring seal with automatic transmission fluid WSS-M2C922-A1 or equivalent meeting Jaguar specification.
To install, reverse the removal procedure.
Lubricate the shift solenoid O-ring seal.
2. Tighten to 8 Nm.
3. Install the main control valve body.