X-Type (X400) V6-2.5L (2005)
Shifter A/T: Service and Repair
Transmission Selector Lever
Removal
1. NOTE: To move the gear selector lever, the ignition must be in the RUN position, with the foot brake pressed.
Move the gear selector lever to the 'N' position.
2. Remove the center console.
3. Disconnect the electrical connector.
4. NOTE: The center console bracket cannot be removed at this stage.
Remove the center console bracket retaining screws.
5. Release the gear selector cable locking pin.
6. Disconnect the gear selector cable from the J-gate.