X-Type (X400) V6-2.5L (2005)
Flywheel: Service and Repair
Flywheel
Removal
1. Remove the clutch disc and pressure plate.
2. NOTE: Prevent the flywheel from rotating. Remove the flywheel.
Installation
1. NOTE: Make sure the crankshaft and flywheel mating faces are clean before installation.
NOTE: The flywheel will only locate in one position.
NOTE: Tighten the retaining bolts working diagonally.
Install the flywheel.
^
Prevent the flywheel from rotating.
^
Tighten to 80 Nm.
2. Install the clutch disc and pressure plate.