X-Type (X400) V6-2.5L (2005)
21. Remove the protective tape from the windshield glass aperture.
Installation
1. Make sure the new windshield glass surface is clean using Betawipe spirit.
2. Apply glass primer to the mating face of the windshield glass.
3. Apply glass primer to the mating face of the body flange.
4. Cut the adhesive nozzle to achieve a triangular section bead 8 mm (0.31in) wide by 13 mm (0.51 in) high.
5. NOTE: Apply windshield adhesive WSS-M2G379-A6A or equivalent meeting Jaguar specification around the windshield glass edge.