jaguar Workshop Repair Guides

Jaguar Workshop Service and Repair Manuals

Body - Interior/Exterior Door Handle Binds/Stiff/Squeaks|Page 6399 > < Body - Interior/Exterior Door Handle Binds/Stiff/Squeaks|Page 6397
Page 3
background image

Disclaimer

Technical Service Bulletin # XT501-038

Date: 060901

Body - Interior/Exterior Door Handle Binds/Stiff/Squeaks

NUMBER 
XT501-038

DATE
01 Sep 2006

MODEL
X-TYPE

SECTION:
501-14 - HANDLES, LOCKS, LATCHES AND MECHANISMS

Door Handle Stiff, Binding or Squeaking

AFFECTED VEHICLE RANGE:
X-TYPE

VIN: 
C00001 onwards

Model Year:
2002 onwards

CONDITION SUMMARY:

EXTERIOR OR INTERIOR DOOR HANDLE IS STIFF, BINDING OR SQUEAKING

Situation: 
A customer may report a concern that the exterior or interior door handle is stiff, binding or squeaking when opening the door.

Increased friction between the interfacing surfaces on the door latch mechanism may be the cause.

Action: 
Should a customer express this concern, refer to the Repair Procedure detailed in this bulletin to lubricate all door latch mechanisms.

PARTS:

JLM 21206

K5P205 Carbaflo grease

Qty as required (shop consumable)

NOTE:

Carbaflo grease (K5P205) is contained in the Squeaks and Rattles Repair Kit (JLM 21204) and is a shop consumable. Replacement Carbaflo grease
may be ordered thru Unipart using part number JLM 21206.
Shop supplies and consumables are not claimable under warranty.

WARRANTY:

NOTE:

Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always
refer to DDW to obtain the latest repair time.

Body - Interior/Exterior Door Handle Binds/Stiff/Squeaks|Page 6399 > < Body - Interior/Exterior Door Handle Binds/Stiff/Squeaks|Page 6397