X-Type (X400) V6-3.0L (2002)
1.
Install new pins noting the positions of the green fixing pins in illustration 3 and illustration 4 (shown by black arrows) install new grommets
noting the positions of the black grommets in Illustration 5 and Illustration 6 (shown by black arrows), refer to Technical Bulletin XT501-02.
2.
Check good adhesion around water blanket butyl path, and install foam curtain into door trim pads.
3.
Apply Krytox lubrication to front and rear edges of door trim pads.
Note:
To save excessive damage when removing grommets from Body-in-White (B-I-W), use suitable screwdriver and break wings into Inside of B-I-W.
Affected VIN Range
C00689 to C18600
End Registers
Description
Buzzing emanating from the end vents-may be perceived as coming from the door pads.
Root Cause
Freeplay in the horizontal vanes of the end registers.
Action