X-Type (X400) V6-3.0L (2002)
Rear Door Weatherstrip: Service and Repair
Weatherstrip
Removal
1. NOTE: Front door shown, rear door similar.
Detach the door checkstrap.
2. Remove the window aperture trim.
3. Remove the frame seal.
4. NOTE: A start point locator can be found on each weatherstrip in the form of a dot. The start point is on the 'B' Post corner of the door. Using an
indelible marker record the start point.
Using an indelible marker, trace around the door weatherstrip.
5. Remove the door weatherstrip.
6. Using a suitable tool remove any residual adhesive from the door.