X-Type (X400) V6-3.0L (2002)
Using Snap-on socket S6176 remove the HO2S.
Installation
1. CAUTION: Make sure that the HO2S casing and cable are not damaged.
To install, reverse the removal procedure.
-
Tighten to 40 Nm.
Using Snap-on socket S6176 remove the HO2S.
Installation
1. CAUTION: Make sure that the HO2S casing and cable are not damaged.
To install, reverse the removal procedure.
-
Tighten to 40 Nm.