X-Type (X400) V6-3.0L (2002)
/v6-3.0l/Page-613001.png)
Engine Control Module: Service and Repair
Powertrain Control Module (PCM) 18.30.29
Removal
1. Disconnect the battery ground cable.
2. Disconnect the PCM electrical connector.
3. Detach the generic electronic module (GEM) from the PCM.
1. Release the GEM locking tang.
2. Detach the GEM from the PCM.
4. Remove the PCM.
1. Remove the PCM retaining nut.
2. Remove the PCM.
