X-Type (X400) V6-3.0L (2002)
Oxygen Sensor: Service and Repair
Catalyst Monitor Sensor RH
Catalyst Monitor Sensor RH 18.30.81
Removal
1. Disconnect the battery ground cable.
2. Remove the intake manifold.
3. Raise and support the vehicle.
4. Undo and remove the exhaust shield securing bolt to allow access to the catalyst monitor sensor.
5. Lower the vehicle.
6. Disconnect the catalyst monitor sensor electrical connector.
7. Detach the catalyst monitor sensor electrical connector from the securing bracket.
1. Release the retaining tang.
2. Detach the catalyst monitor sensor electrical connector from the securing bracket.