X-Type (X400) V6-3.0L (2002)
Transmission Position Switch/Sensor: Adjustments
Adjustment-Transmission Range (TR) Sensor
1. Remove the battery tray.
2. Loosen the Transmission Range (TR) sensor.
3. Make sure the J-Gate shift selector is in the "N" position.
4. Using the special tool adjust the TR sensor.
^
Tighten to 10 Nm.
5. Remove the special tool.
6. Install the battery tray.
7. Make sure the vehicle starts in the "P" and "N" positions and the J-Gate shift selector illuminates in all positions.
NOTE: If the J-Gate shift selector does not illuminate in all positions repeat the complete procedure.