X-Type (X400) V6-3.0L (2002)
5. Bleed the clutch system.
^
Attach a proprietary bleed jar to the bleed nipple and open the bleed nipple one turn.
^
Depress the clutch pedal repeatedly until the emerging fluid is free of bubbles; always make sure that there is sufficient fluid (5 mm above the
MAX) in the reservoir.
^
After bleeding, tighten the bleed nipple.
^
Install the bleed nipple cover.
^
Install the dust cover.
^
After bleeding, depress the clutch ten times and check that it is functioning correctly.
6. NOTE: Make sure of absolute cleanliness when filling brake fluid.
Check the brake fluid level.
^
The fluid level should be between the MIN and MAX marks. If the level drops below the MIN mark, the brake WARNING indicator will light
up.
^
As necessary, fill the brake fluid reservoir with brake fluid.