X-Type (X400) V6-3.0L (2002)
2. CAUTION: Support the window glass prior to removal of the protective tape.
Remove the protective tape from the top of the window glass.
3. CAUTION: Use care when installing the sleeve and pin into the window glass. Failure to follow these instructions may result in damage
to the window glass.
Install the pin.
CAUTION: Make sure the sleeve is fitted central in the window glass.
1. Install the sleeve.
CAUTION: Make sure the sleeve stays central in the window glass.
2. Install the pin.
4. NOTE: Insert the glass into the regulator glass clamp and firmly pushed down. Check both sides of the clamp have snapped over the spacer
bracket pin.
Attach the window glass into the regulator clamp.