X-Type (X400) V6-3.0L (2002)
4.
Install and seat new link to headlamp power-wash jet (Illustration 2).
Note:
New link pegs are offset lowermost when installed for correct seating of cover to bumper.
5.
Install power wash jet cover to new link (Illustration 3).
Note:
Power-wash jet covers are marked on the rear face left hand or right hand.
6.
Slowly release headlamp power wash jet to its retracted position.
7.
Repeat steps 1 to 6 to install remaining headlamp power-wash jet link.
Parts Information:
DESCRIPTIONPART NUMBER
QTY
Link
C2S30434
1 per side
Warranty Information: