XF (X250) V8-4.2L (2009)
Front Door Window Motor: Customer Interest
Body - Erratic Front Door Window Operation
NUMBER JTB00169
(Issue 1)
MODEL XF
DATE 10 JULY 2009
SECTION: 501
Front Door Window Closing Incorrectly - Repair Procedure
AFFECTED VEHICLE RANGE:
XF (X250)
VIN: R00001 - R54858
Model Year: 2009 - 2010
CONDITION SUMMARY:
Situation:
When closing a front door window, the glass may close and then open or the one-touch function is inoperative. This may be caused by the window
regulator motor sensor supplying inconsistent feedback reading to the Door Control Module (DCM).
Action:
In the event of a customer concern of the above, refer to the Repair Procedure outlined below to replace the affected window motor.
PARTS
TOOLS:
Refer to Workshop Manual (GTR) for any required special tools
WARRANTY:
NOTE:
Repair procedures are under constant review, and therefore times are subject to change; those quoted here must be taken as guidance only. Always refer
to DDW to obtain the latest repair time.
DDW requires the use of causal part numbers. Labor only claims must show the causal part number with a quantity of zero.
REPAIR PROCEDURE
INSPECT GLASS APERTURE AND WAIST SEALS
1. Inspect the glass aperture and waist seals for any obstructions and proper installation.
^ Rectify as necessary.
TEST ONE-TOUCH CLOSE FUNCTION
NOTE: