XF (X250) V8-4.2L (2009)
6. Remove the special tool.
7. NOTE: Left-hand shown, right-hand similar.
Install the engine mount retaining nut.
-
Tighten to 63 Nm.
8. CAUTION: The final tightening of the suspension components must be carried out with the vehicle on its wheels.
NOTE: Left-hand shown, right-hand similar.
Install the rear lower arm.
9. CAUTION: The final tightening of the suspension components must be carried out with the vehicle on its wheels.
NOTE: Left-hand shown, right-hand similar.
Install the front lower arm.
10. Install the steering gear
-
Tighten to 100 Nm.